KENYON KS-4 GYRO STABILIZER INVERTER BATTERY CHARGER CASE BINOCULARS GUN CAMERA

Description

CLICK HERE TO GO DIRECTLY TO THE STORE
KENYON KS-4 GYRO STABILIZER INVERTER BATTERY CHARGER CASE BINOCULARS GUN CAMERA
PLEASE LOOK AT ALL OF THE PHOTOS AND TEXT FOR ADDITIONAL INFORMATION, AND TEL. ME IF YOU NEED ADDITIONAL INFORMATION. THANKS, DAVID RIDDLE
YOUR PURCHASE IS FOR A FULLY GUARANTEED, KENYON BRAND, MODEL KS-4, GYRO (GYROSCOPIC) STABILIZER COMPLETE WITH COILED POWER CORD AND 3-PIN MALE XLR CONNECTOR, CUSTOM-MADE 400HZ 120-VOLT INVERTER / BATTERY-PACK IN A PADDED CASE WITH SHOULDER-STRAP AND BELT LOOP, WALL CHARGER WITH 3-PIN FEMALE XLR CONNECTOR AND A FITTED PADDED CASE ALL IN EXCELLENT CONDITION.  (PLEASE SEE PHOTOS FOR ADDITIONAL DETAILS)
NOTE:
THE BAUSCH & LOMB 7X50 "BU SHIPS" 1943 BINOCULARS ARE NOT INCLUDED IN THIS SALE BUT ARE AVAILABLE.
THE FOLLOWING IS FROM THE KENYON WEBSITE DESCRIBING THE USEFULNESS OF "GYRO-STABILIZATION":
The Kenyon hand-held gyro stabilizer was invented by Ted Kenyon in 1957 to help stabilize binoculars and cameras when used in challenging conditions. When wind, waves, air turbulence and vehicle movement make getting usable images difficult, the gyro stabilizer will easily attach to the device to resist the unwanted motion.
The standard 2 axis gyro consists of two heavy metal wheels, spinning at 20,000 rpm. Each wheel has it's own brush-less AC motor specifically designed to use very little power to obtain the optimum speed needed to drive the wheels. Each wheel is contained in a restrained gimbal and allowed to precess a certain distance, depending on the weight of the wheel.
An inverter is used to to take DC power and convert it to the 115 VAC 400 Hz power needed to operate the gyro.   Both wheels counter rotate and work together to resist outside forces the gyro is  subjected to. When the gyro is attached to a camera in line with the lens, the gyro resists movement in pitch and yaw, thus the term "2 axis stabilization". If another gyro is used perpendicular to the first gyro, 3 axis stabilization is obtained
in pitch, yaw and roll.
Each gyro is made by hand in our facility in the USA.
The outer frame is made of 6061 aluminum and is black hard-coat anodized for longevity. Most of the internal parts are also made and assembled by Kenyon so that high      precision and quality is maintained guaranteeing a lifetime of use.
The advantage of using a Kenyon gyro is that it can be used hand-held, in confined spaces, in all weather conditions and can always be repaired if a "gravity event" should occur.
I AM SELLING TH1S ITEM FOR 9.00
KENYON KS-4, GYRO STABILIZER, 400HZ 120-VOLT INVERTER / BATTERY-PACK, WALL CHARGER, FITTED PADDED CASE  B10-9124-99
All company and product registered trademarks are acknowledged and are the property of their respective companies
CLICK HERE TO GO DIRECTLY TO THE STORE
We Ship via UPS ground (unless otherwise specified), charges are calculated upon the weight of the item, the cost of shipping, packaging, and insurance to your location from California.
WE DO NOT ACCEPT PAYPAL
We
DO
accept American Express, Discover, Visa & Mastercard
PLEASE CONTACT US FOR PAYMENT INSTRUCTIONS
CALIFORNIA REISDENTS PAY LOCAL SALES TEX
ATTENTION INTERNATIONAL CUSTOMERS
PLEASE CONTACT US FOR PAYMENT INTSTRUCTIONS
SALES POLICY:
Please be sure to read all text COMPLETELY for IMPORTANT information, specific to this item. We offer a 14 day return privilege on our goods, the buyer is responsible for return shipping costs. A 10% re-stocking fee will apply. If you have any additional questions about our terms and conditions of sale please give us a call.
Note: All manufacturers names and models are used for illustrative purposes only. Any trademarks, tradenames or copyrights remain solely the property of the manufacturer
ALL TEXT AND IMAGES ARE COPYRIGHT 2013 DRCO INC. AND MAY NOT BE USED FOR ANY PURPOSE WITHOUT WRITTEN PERMISION
Powered by SixBit's eCommerce Solution