SHOVEL HANDLE REPLACEMENT SOLID CORE !! MADE IN USA Warranty too!

Description

SORRY FOR THE HIGHER PRICE...NEW POSTAGE RATES AND MATERIAL COSTS ARE KILLING US!
BUT THESE REALLY ARE GREAT HANDLES!!!
The pictures and the
buyer
feedback tell the story on these
SOLID
handles MADE
IN
THE
USA!!!!
Specs are below
Six month warranty for non-commercial use. If you break it during normal use just let us know and we will send you another one for free. We'll ask you for a  picture of the broken handle.  I actually expect this handle will last for YEARS because the ones I put on my shovels in 2012 look like they were put on yesterday.
Obviously we don't ship the handle that is cut in two pieces!! That is only to show you how solid they are.
Don't
be fooled by cheaper HOLLOW imitations you might see on Ebay that
are NOT SOLID!!  A BROKEN HOLLOW  handle on your current shovel is probably why you are looking for a new handle right now!  Hollow-top handles, with thin sides, are the junk you see on a one season shovel in the "big box" stores.
The car pictures show the strength of
these
solid
plastic handles. (Hyundai Santa Fe resting on the handle)
Don't try
this on a cheap
hollow
handle they slap on most shovels, spades, etc. just to save a little $$$!!
This handle should be a good solution
.
And if you buy 5 (five or more) we'll include a sixth handle for FREE with the first five
Here are the specs:
-
Made
in
the
U
S
A
....
NOT made you-know-where in the place they make  a ONE DAY or one-season-wonder!!
-
1 13/64" (just under 1 1/4 inch) INNER Diameter socket
-1 7/8" deep socket (that the shaft goes into the handle)
-About 5" wide (see picture)..plenty of room for a big hand and glove!
-
Professional quality
..You'll see THIS handle on top of the line shovels, spades and ensilage forks selling for -65 on the internet
-Can use this with either wood or fiberglass handle shovels
-
Designed
so
you can wear a glove or mitten that will fit inside the D-handle
-Polypropylene grip. Solid but is still lightweight (This is a "tank" compared to most original equipment out there!)
-Not in fancy packaging..but brand new
-We try to get these  in the mail the NEXT mail day 100% of the time..sometimes the same day when ordered in the AM Eastern time!
-Shipped via
first class mail or Priority...
not some cheap slooooow method
-If your shovel handle is less than 1 13/64 inch you can probably wrap some duct tape around the top of the handle to increase the diameter of the handle and then slip the D-handle over the handle you just made a bit wider!  All we have is 1 13/64 inch inner diameter but that seems to be the standard for most shovels.
Pictures attached. You can see a small indentation where YOU will screw in a screw (that you will buy somewhere or take off of your current shovel handle) onto each side of the shovel to hold the handle in place.  That indentation is on each side of the handle.
If you buy five or more we will give and ship you a sixth for FREE!!!
Hope this handle is exactly what you are looking for today on EBay!
Shoot an email if you have questions.......Thanks......Jay