UNDERWATER BOX FOR GARRETT ACE 150 / 250 / 350

Description

Attention !!!
Please include your detector model number when purchasing.
By default I will send for ACE 250
Open Instruction
Amulet Underwater Box is especially for the most popular and mass popular lines of devices of Garret Ace's models, which makes happy their owners with the new decisions, trouble free work and indestructibility 150/250/350 for many years, and of course for the new models announced in 2016 in the line of Garret Ace 200/300/400 and 200i/300i/400i.Amulet Underwater Box extends different possibilities of this device cardinally. This device grows from land into an all weather amphibian.
It will protect CB from snow, rain, mud and physical elimination at falling from a height, falling on it and so on(when it's on the land).In water it will give an opportunity to search(especially executable in summer months)pleasant finds of gold and silver. It will allow not standing when it's so hot and when it's rather hot to search on the land you may combine a pleasant coolness with possible gladness of findings. Having rather small cost of the Amulet Underwater Box it can be compensated for one exit (for example if you find a wedding ring which is nearly 3grammes).
Amulet Underwater Box sets on the barbell of Garret Ace into place of CB.CB sets into box (details are shown on video, link is below).The regular socket of spool is finished a little (details are shown on video, link is below).You can use any headphones (mono) with the plug (6.3mm-large jack).Working depth is to 1metre, maximum depth of immersion is 2metres.
Amulet Underwater Box which is set on a barbell has positive buoyancy that is very convenient at a submarine search. When you find an aim, a device can be released and it'll float near the search engine.
It is necessary to use a headset with a mono plug.
Underwater headphones for underwater box for Garrett ACE
http://www.ebay.com/itm/182345888335?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Complectation:
Amulet Underwater Box
Silicon glue (sealant)
Silicon lubricant (gel)
Packing box
Links to video :
Link 1) Installation box on the rod detector -
https://www.youtube.com/watch?v=hjN1pHTgA00
Link 2) Finalize the socket -
https://www.youtube.com/watch?v=h_le0I-TjpY
We thank you for buying Amulet Underwater Box. Read this instruction very attentively-it will help you to use this box right and safely. Wrong exploitation of this product can lead to violation of water tightness (Impermeability) and to become a reason of different damages in CB that it's repairing can be impossible. Before using the AUB, conduct a thorough check according the recommendations. To use this product correctly, read this instruction very attentively and read the information of the exploitation of this product, checking before using and keeping after using.
A producer isn't responsible for any accidents caused by immersion to water with metal detector. In addition material losses are not compensable because of internal damages by reason of water penetration inside the CB of the metal detector.
A producer isn't responsible (assumes no obligation) of payment the compensation for accidents (injuries, traumas, material losses) during the using this product (AUB).
ATTENTION:
1) Do not try to demount or remodel this product. It can lead to violation of waterproofing or to appearance the defects.
2)Using or storing the product in conditions which we will list below can lead to wrong function(malfunction),breakages, damages, fires, fogging of the internal parts or to violation of waterproofing. You have to avoid:
-places with high temperature, for example places with direct sun lights, cars and so on;
-places near an open flame or fire;
-depth under the water more than 3metres;
-places where there are volatiles (solvents).
Opening and closing the box where there is sand, dust or dirt can worsen the water tightness of this product and water can   get inside. It is necessary to avoid. To provide the Impermeability after closing the box, you have to make sure, that there are no alien objects on contacting surfaces and compressions. Otherwise a flow is possible.
Preparation to exploitation.
You bought the Amulet Underwater Box. What need you do at first?
1) To finalize the socket of your spool with the silicon glue(as its shown on video)
2) To set Amulet boxing on a barbell instead of CB of metal detector.
3) To set the CB (control block) into Amulet box connecting cables inside the box as it is shown on video (Link 1).
4) To grease lightly the rubber compactor with the silicon lubricant for the coil connector, put in coil connector on the box.
5) To connect the coil plug to boxing.
6) To grease lightly the compactor with the silicon lubricant which is in the audio socket and to insert the plug of headphones.
Exploitation
Batteries must be new, accumulators must be charged that it was not necessary  to open the box in conditions in the presence of sand, dust and litter that can cause leakage.
All components of this boxing passed careful control of quality during the fabrication process, and also inspection of functioning in the process of assembling. In addition all products passed tests on a water tightness at the special test setting for confirmation of compliance to technical descriptions. Nevertheless, if you disrupt the transport conditions or storing or violation the rules of technical service, the water tightness can be broken (disrupted).Before using its necessary to do the procedure of screening which is written below.
Cover seal isn't necessary to grease. Closing box hermetically make sure that hair, fibers, grains of sand and other objects don't get to the seal and to the contact surface (case cover).Even one hair or grain of sand can cause flowing. You should always do this test. A finishing test will be below. You have to check up the work of different buttons. It will take you 5minutes (for checking).
At first dip the box only on 3 seconds and make sure that water doesn't get into boxing.
Then dip the box on 30 seconds and make sure again that there isn't any water inside the box.
Then dip on 3 minutes and try to involve all the buttons and check the following:
-water isn't coming into the box;
-there is no sweat inside the box.
If you find sweating or drops of water , slide the o-ring service and repeat the test. If it's all right you can begin searching.
After exploitation
Wash the box with clean fresh water. After using a box in salt water it's necessary to put the box into clean fresh water (from 30 minutes to 1 hour) to remove salt residue.
Remove excess water.
Remove all the drops of water with the air or with the soft lint-free cloth on a joint between front and back parts of corps of boxing, opening/closing parts and on another involved parts.
ATTENTION
-Do not disassemble a device for washing (ablution)
-Salt falling down after drying from box can violate its capacity. After using you have to wash it thoroughly.
ATTENTION
If drops fall to the interval between front and back parts of boxing , they can get inside when opening .Wipe all the drops carefully.
You need to disassemble the barbell immediately after searching if you want the barbell knee not to jam in the assembled state.
Storage (storage)
Store the underwater amulet box open in a dry place.
MADE IN EU